CEC CD 2100
|
|
Description
CD
player which carries a 3RD exaggerated tone oscillation
circuit.
In the 3RD
exaggerated tone oscillation circuit, the crystal
oscillator which performed the special cut is adopted so
that the impedance by this circuit may become 1/10 or less
[ of fundamental-wave impedance ]. It is possible to carry
out the choice oscillation only of the 3RD exaggerated tone
wave stabilized by this.
Furthermore, it was made to set it as 1:1 so that a duty
ratio may become more exact with a clock generator, and by
increasing stabilization of a power source and voltage, the
oscillation mechanism of the 3RD exaggerated tone wave
improved, and large reduction-ization of a Jitter value is
realized.
1 bit and a D/A
converter without zero crossing distortion are adopted as a
D/A converter.
Measures against vibrationproofing, such as adopting the
aluminum extrusion material of 4mm thickness as the front
panel, and also also giving special vibrationproofing
material to the chassis of top covering of the enclosure or
the pickup lower part, are taken.
The plug-in type power cord is adopted.
Wireless remote control is attached.
| Form |
|
|
CD player |
|
|
|
|
|
Frequency response |
20Hz-20kHz±1dB
|
| Signal
to noise ratio (IHF-A)
|
105dB
|
| THD
|
0.003%(1kHz)
|
| Wow and
flutter
|
Below
measurement full limits (crystal oscillation
accuracy)
|
| Channel
separation
|
100dB(1khz)
|
| Output
|
2Vrms
|
| Digital
output
|
Coaxial
output: 0.5 Vp-p/75ohms
|
| Sampling
frequency
|
44.1kHz
|
| Quantifying
bit number
|
16bit-
linear
|
| Error
correcting system
|
CIRC
|
| Digital
filter
|
8 time
oversampling digital filter
|
|
|
|
|
System clock system |
3rd
exaggerated tone oscillation
|
| Power
source
|
AC100V,
50Hz/60Hz
|
| Power
consumption
|
12W
|
| Dimensions
|
Width
435x height 100x depth of 290mm
|
| Weight
|
6kg |
